I’d always harboured a desire to make a lagerphone and finally I’ve ticked it off of my bucket list. A lagerphone is essentially a tambourine type of instrument made from a broomstick and crown capped bottle tops. From the Idiophone family it is mainly used in folk music and is known by many names from many different cultures.
The first task was collecting the bottle tops, which required much merriment and the sampling of various types of lager which had different coloured bottle tops. I was clearly the right man for the job.
Another pre-requisite was my penchant for hoarding. During renovations I kept one of our old curtain rods, which was about an inch and a quarter diameter (32mm). It also featured a finial which with a nose added became the ‘Noddy’ head. In my research I discovered that it was commonplace to place a boot at the bottom to protect a venues flooring. It so happened that I’d kept one of my fifteen year old’s boots from when he was a toddler. Actually we kept all of them.
The next stage was punching holes in the bottle tops. For this task I used an off-cut from one of our veranda posts, which I had drawn diagonal lines from corner to corner and drilled a 5/16” (8mm) hole in the centre where the lines bisected. With a nail punch I could then line my bottle top up over the hole using the diagonal lines and with one tap I could punch a hole in the centre. The jig worked quite well although I had to manually pull off the bit off metal still left hanging.
Next I space out where I wanted the bottle tops which was basically a north/south/east/west pattern. I carefully drilled them and bought some screws with a clean shank to affix each set of twin bottle tops.
Additionally I placed a mint tin containing ball bearings into the boot which was simply screwed to the curtain rod between the tread of the boot. I used a bit of plumbing pipe insulation for the handle and the sock of the boot. Also on the large beer can at the top I placed a nut suspended from a bit of wire to act as a clapper.
I thoroughly enjoyed the process and the thought of terrorising my clan gatherings with my new lagerphone fills me with wicked glee. So if your interested in making a lagerphone here are a few name variations to Google as the various designs are as different and wild as your imagination.
a.k.a.
- Boozaphone,
- Mendoza/mendozer,
- Monkey stick,
- Murrumbidgee River Rattler
- Teufelsgeige
- Jingling Johnie
- Stumpfidel
- Ugly Stick
Baghead Kelly's Blog 